How To Fix Led Christmas Lights Right And Easy
Fix Christmas lights can be a science that is beneficial to us. This will be very useful when the Christmas lights in our homes destroyed or extinguished. With the science of course we can fix Christmas lights that are in our homes.
How to repair broken Christmas lights properly and easily here may be able to help you.
How To Fix Led Christmas Lights
Warning
This activity involves the high-voltage electricity. So you are strongly recommended to be careful. Not to make a mistake that will be fatal on yourself. For example, shock electric current, causing the home fires and even can experience heavy metal against poisoning.
Therefore, we recommend that you pay close attention to the steps how to repair broken Christmas bulbs carefully. Do not let this activity lead to disaster for you.
The First Step: Tools And Materials Required
You have to provide the equipment to repair broken Christmas lights are:
- Voltage Detector
- Soldering Iron
- Solder
- Heat Shrink Tube
- Wire Strippers
- Wirre Cutters
Step Two: Cicuit Explanation
The next step to fix a broken Christmas lights is to read the instructions first erlebih image. So-called "Circuit Explanation"
We have to do this step in advance so that step by step that we use is not wrong.
The example we provide now, namely Christmas lights with Judy 70 string that consists of two parallel. At the Christmas lights have 35 lights series. When one of the led's fails the circuit breaks which affect all the other lights (half of them) that are in the same series circuit.
Don't forget to pay attention to the limit current of the LEDS. Because we know that the LED is damaged will be very vulnerable if we do the wrong steps. We should pay attention to the current limit of each led light. For this repair we are actually going to bypass the faulty light. This will increase the current that goes through the remaining lights because we have eliminated part of the resistance. However, taking one light out should not increase the current enough to damage the remaining led's in the same circuit.
Cicuit Explanaton
Step three: Detection
Detection find wire that already do not have electricity. The live wire or just have very low voltage. Because the wire such as this will cause the led lights do not provide maximum light.
You have to do to find the wire that beramasalah use the voltage detector to check the live voltage wire between each light, starting at the end that plugs into the wall outlet. There should be voltage detected at the live wire going into the first light. After that check the wire that menuu at the second light. Please search for problems that occur. If it doesn't find any problems on the wire flows, do to the last wire.
For example to allow you easier to understand this theory:
As an example, if there is voltage on the wire between the 6th and the 7th light light, but there is not voltage between 7 and 8 light light, then light 7 is likely the problem.
step Four : Verification
Once you find the wire that has the problem and find the LEDs do not function properly. Next steps i.e. replace the LED with a new one. But we need to check back. If the LED near the power wire or having problems.
When have sure damaged LED lamp, unplugged power source and then put the sewing pin through the cable to the LED light to bypass is concerned.
Step Five : Repair
In this step, please cut the cable problem or if there is a problematic LED please replace with a new one or who can still function properly.
Steps six : Conclusion
With the faulty LED light removed the light string the half that did not work is now working minus 1 light.
As in the above explanation, when we mneghapus one light, it will increase the current to the LEDs become higher.
As a suggestion, if you still doubt with what you will do. We recommend that you bring your Christmas lights to the place of repair of electrical equipment. Than you are taking a huge risk. Could even be on the life or your home.
Komentar
Posting Komentar